How to Install Texas Instruments Tusb7320 Drivers For Mac
If you have a Texas Instruments Tusb7320 USB 3.0 host controller on your Mac, you may need to install the drivers manually to make it work properly. The Tusb7320 is a high-performance PCIe Gen2 x1 to two-port SuperSpeed USB 3.0 host controller that supports up to 5 Gbps data transfer rate. It is compatible with Mac OS X 10.6.8 or later, but it may not be recognized by the system automatically.
In this article, we will show you how to download and install the Texas Instruments Tusb7320 drivers for Mac in a few simple steps.
Step 1: Download the Drivers
The first step is to download the drivers from the Texas Instruments website. You can find them at this link: https://www.ti.com/tool/TUSB7320SW. You will need to register and agree to the terms and conditions before you can download the file.
The file name is TUSB7320SW-MAC-1.0.16.zip and it is about 4 MB in size. Save it to your desktop or any other convenient location.
Step 2: Unzip the File
The next step is to unzip the file using a tool like WinZip or The Unarchiver. You should see a folder named TUSB7320SW-MAC-1.0.16 containing two files: TUSB7320.kext and Readme.txt.
The TUSB7320.kext file is the driver file that you need to install. The Readme.txt file contains some instructions and troubleshooting tips that you can read if you encounter any problems.
Step 3: Install the Drivers
The final step is to install the drivers using a tool like Kext Utility or Kext Wizard. These are third-party applications that can help you load kernel extensions (kexts) into your Mac system.
You can download Kext Utility from this link: http://cvad-mac.narod.ru/index/0-4. You can download Kext Wizard from this link: https://www.hackintoshzone.com/files/file/75-kext-wizard/.
After downloading and installing one of these tools, launch it and drag and drop the TUSB7320.kext file into the main window. Then click on the Install button and enter your administrator password when prompted. The tool will copy the driver file to the appropriate location and rebuild the cache.
After the installation is complete, you will need to restart your Mac for the changes to take effect.
That's it! You have successfully installed the Texas Instruments Tusb7320 drivers for Mac. You should now be able to use your USB 3.0 devices with your Tusb7320 host controller without any issues.
If you have any questions or feedback, please leave a comment below. We hope this article was helpful and informative. ec8f644aee